Die Reckmann UD-x ist eine unter Deck installierte hydraulische Vorsegel-Rollreffanlage. Je nach Einsatzart stehen verschiedene Möglichkeiten der Anbindung zur Verfügung. Wie alle Reckmann Anlagen sind auch die Furler der UD-x Reihe mit einem Nothandantrieb ausgestattet. Das modulare System bietet die folgenden, teils optionalen, Features:
Erhältlich sowohl mit Aluminium, als auch mit Kohlefaserprofilen.
Der einzigartige Handantrieb gewährleistet ein Höchstmaß an Sicherheit. Durch einfaches Einstecken einer Standardwinschkurbel wird der Antrieb ausgekuppelt und auf Handbetrieb umgeschaltet. Dank seines speziellen Getriebemechanismus, der eine Übertragung der Segelkräfte auf die Winschkurbel verhindert, lässt sich die Reffanlage auch im Handbetrieb leicht und sicher bedienen.
Die Reckmann Hochleistungsfallenschlitten drehen extrem reibungsarm und garantieren so einen sicheren Betrieb ohne Verdrillen des Falls. Das kompakte Design und die Größenabstufung sorgen für ein geringes Topgewicht.
Der Tack Slider oder auch "floating tack swivel" genannte Wirbel erlaubt es, dass Vorliek des Segels unabhängig vom Stag zu spannen. Besonders bei Segeln mit Halyard Lock ist das eine notwendige Ergänzung.
Unsere Karbonprofile bieten hohe Festigkeit bei geringem Gewicht. Durch eine Gewichtsersparnis von 50–60 % kann verglichen mit herkömmlichen Aluminiumprofilen eine deutliche Leistungssteigerung erreicht werden.
UD-2SC | UD-2SCRT | UD-3SC | UD-3SCRT | UD-4SC | UD-4SCRT | UD-5SC | UD-5SCRT | UD-5.5SCRT | UD-6.5SCRT | ||
A | [mm] | 160 | 280 | 220 | 382 | 250 | 463 | 340 | 606 | 710 | 952 |
B | [mm] | 150 | 150 | 196 | 196 | 242 | 242 | 310 | 310 | 316 | 428 |
C | [mm] | 174 | 174 | 252 | 252 | 338 | 338 | 420 | 420 | 396 | 568 |
i | [mm] | - | 80 | - | 80 | - | 80 | - | 80 | 80 | 80 |
Hub Stagverstellung | [mm] | 60 | 80 | 60 | 100 | 80 | 150 | 120 | 200 | 250 | 400 |
Gewicht | [kg] | 12,5 | 15,7 | 27 | 30,7 | 53 | 60,8 | 110 | 121 | 145 | 312 |
Volumenstrom | [l/min] | 10 | 10 | 17 | 17 | 30 | 30 | 40 | 40 | 40 | 65 |
Zugkraft rt-Adjuster | [t] | - | 7@350bar | - | 12t@250bar | - | 20@300bar | - | 35@270bar | 45@325bar | 63,5@350bar |
max. Staglast | [t] | 8 | 8 | 15 | 12 | 20 | 20 | 35 | 35 | 45 | 58 |
max. Tack-Last | [t] | 1,5 | 1,5 | 2,5 | 2,5 | 3,5 | 3,5 | 5 | 5 | 6 | 8 |
max. Rodgröße | [-] | -40 | -40 | -76 | -60 | -91 | -91 | -170 | -170 | -220 | -320 |
max. Durchmesser Draht | [mm] | 12 | 12 | 16 | 16 | 22 | 22 | 32 | 32 | - | - |
max. Vorstaglänge | [m] | 23 | 23 | 36 | 36 | 42 | 42 | 50 | 50 | 58 | 70 |
passende Aluminiumprofile | [-] | R20, R30 | R20, R30 | R40, R5 | R40, R5 | R5, R6 | R5, R6 | R6, R7 | R6, R7 | R7, R8 | - |
passende Kohlefaserprofile | [-] | S2, S2.5 | S2, S2.5 | S3, S4, S4.5 | S3, S4, S4.5 | S5, S5.5 | S5, S5.5 | S6, S6.5, S7 | S6, S6.5, S7 | S7, S7.5, S8 | S8.5, S9 |
UD-2C | UD-3C | UD-4CRT | UD-6.5CRT | ||
A | [mm] | 205 | 247 | 645 | 1080 |
B | [mm] | 125 | 147 | 172 | 372 |
C | [mm] | 205 | 250 | 280 | 465 |
i | [mm] | - | - | - | - |
Hub Stagverstellung | [mm] | 60 | 60 | 150 | 300 |
Gewicht | [kg] | 10 | 17,5 | 47 | 225 |
Volumenstrom | [l/min] | 10 | 17 | 30 | 65 |
Zugkraft rt-adjust | [t] | - | - | 23t@350bar | 63,5t@350bar |
max. Staglast | [t] | 9 | 13,5 | 21 | 58 |
max. Tack-Last | [t] | 1,5 | 2,5 | 3,5 | 8 |
max. Rodgröße | [-] | -40 | -60 | -91 | -320 |
max. Durchmesser Draht | [mm] | 12 | 16 | 22 | - |
max. Vorstaglänge | [m] | 23 | 36 | 42 | 70 |
passende Aluminiumprofile | [-] | R20, R30 | R40, R5 | R5, R6 | - |
passende Kohlefaserprofile | [-] | S2, S2.5 | S3, S4, S4.5 | S5, S5.5 | S8.5, S9 |
UD-2CDF | UD-3CDF | ||
A | [mm] | 200 | 220 |
B | [mm] | 125 | 147 |
C | [mm] | 205 | 250 |
i | [mm] | - | - |
Hub Stagverstellung | [mm] | 60 | 80 |
Gewicht | [kg] | 13,2 | 24 |
Volumenstrom | [l/min] | 10 | 17 |
Zugkraft rt-adjust | [t] | - | - |
max. Staglast | [t] | 9 | 13,5 |
max. Tack-Last | [t] | 1,5 | 2,5 |
max. Rodgröße | [-] | -40 | -60 |
max. Durchmesser Draht | [mm] | 12 | 16 |
max. Vorstaglänge | [m] | 23 | 36 |
passende Aluminiumprofile | [-] | R20, R30 | R40, R5 |
passende Kohlefaserprofile | [-] | S2, S2.5 | S3, S4, S4.5 |
Nut | G | O | A | B | |
[mm] | [mm] | [mm] | [mm] | ||
R10 | doppel | 6,4 | 2,3 | 31,4 | 24,1 |
R20 | doppel | 6,4 | 2,3 | 35,8 | 28,8 |
R30 | doppel | 7,5 | 3 | 45,5 | 36,1 |
R40 | doppel | 7,5 | 3 | 49,1 | 38,7 |
R50 | doppel | 8 | 3,5 | 54 | 42 |
R5 | doppel | 7,5 | 3,5 | 60 | 47 |
R6 | doppel | 7,5 | 3,5 | 72 | 60 |
R7 | doppel | 7,5 | 3,3 | 85 | 72 |
R8 | einfach | 8 | 3,2 | 107 | 93 |
G | O | A | B | |
[mm] | [mm] | [mm] | [mm] | |
S2 | 7,2 | 2,8 | 38,5 | 29 |
S2.5 | 7,2 | 2,8 | 41,3 | 32,2 |
S3 | 7,2 | 2,8 | 49 | 38,5 |
S4 | 7,2 | 2,8 | 55,4 | 44,4 |
S4.5 | 7,2 | 2,8 | 60 | 50,8 |
S5 | 7,2 | 2,8 | 67,1 | 56,6 |
S5.5 | 7,2 | 2,8 | 72,8 | 62,7 |
S6 | 7,2 | 2,8 | 82 | 71,5 |
S6.5 | 7,2 | 2,8 | 86,9 | 76,2 |
S7 large | 10 | 3,8 | 97,3 | 81,3 |
S7 small | 7,2 | 2,8 | 91,3 | 81,3 |
S7.5 | 10 | 3,8 | 107,25 | 90,2 |
S8 | 10 | 3,8 | 112 | 97,3 |
S8.5 | 10 | 3,8 | 122 | 107,5 |
S9 | 13,02 | 5,01 | 148,2 | 132 |
S9.5 | 13,02 | 5,01 | 170,6 | 154 |