[SF-SW]

power supply hydraulic
attachment of the sail without profile
type of installation below Deck

Hydraulic staysail furling system with worm gear for below-deck installation

The Reckmann SF staysail furler is a combination of a turning padeye and a hydraulic stay tensioner. It is designed for staysails that are hoisted on a halyard lock. The self-aligning deck flange reduces bending loads on the extended piston. The stay connector with a quick-release pin allows quick and easy sail attachment.

The SF-SW is hydraulically driven through a worm gear. This eliminates the need for an additional hydraulic brake and allows a reduced installation length below deck compared to the SF-S.

[Product variants]

  SF-8SW SF-30SW SF-45SW SF-65SW/60
max. speed 46 U/min 67 U/min 50 U/min 61 U/min
max. pre-tensioning load 6,8 t @ 350 bar 30 t @ 330 bar 45 t @ 340 bar 65 t @ 340 bar
max. drive torque 85 Nm 679 Nm 842 Nm 1025 Nm
max. holding load 7,8 t @ 400 bar 32 t @ 350 bar 46,5 t @ 350 bar 66,5 t @ 350 bar
stroke 250 mm 400 mm 500 mm 600 mm
Q max 10 l/min 60 l/min 60 l/min 60 l/min
P max 125 bar 140 bar 140 bar 160 bar
weight 15 kg 87 kg 135 kg 201 kg
D 110 mm 180 mm 198 mm 232 mm
d 20 mm 38 mm 45 mm 50 mm
G 25 mm 36 mm 49,50 mm 55 mm
H 430,50 mm 778 mm 901 mm 1040 mm
T 26 mm 35 mm 50 mm 6 mm
W 22 mm 38 mm 45 mm 60 mm

[Features]

Reckmann TTS Top Swivel Overview

Top Swivel TTS

In keeping with our staysail furling systems, we offer a range of swivels. In addition to offering various materials (titanium and aluminium) we also provide various connection options.

Find out more about the Reckmann swivel TTS.

Reckmann staysail furler with deck connection with spherical deck joint

Spherical Deck Joint

This deck connection is based on a spherical segment in a low-friction bearing seat. Owing to the type of construction used, this bearing is significantly smaller. However, the sphere only allows for a maximum deflection angle of +/-10° in all directions. This means that the furling system has to be installed in an inclined deck structure.

Reckmann load control valve block for staysail furlers

Load Control Valve Block

The integrated check valve keeps the hose depressurised, even with attached stay loads, therefore preventing damage caused by a burst hydraulic hose. The adjustable pressure relief valve, which is also integrated, loosens the stay adjuster in the event of an overload and thus prevents the furling system from being damaged. An optional pressure sensor allows for real-time monitoring of the internal cylinder pressure and therefore the attached stay load.

[Related products]