| power supply | hydraulic |
| attachment of the sail | without profile |
| type of installation | below Deck |
Hydraulic staysail furling system for below-deck installation
The Reckmann SF staysail furler is a combination of a turning padeye and a hydraulic stay tensioner. It is designed for staysails that are hoisted on a halyard lock. The self-aligning deck flange reduces bending loads on the extended piston. The stay connector with a quick-release pin allows quick and easy sail attachment.
The SF-S is hydraulically driven with a direct drive. A brake prevents the sail from unfurling unintentionally and secures the system when the furler is not in operation.
| SF-15S | SF-30S | SF-45S | |
|---|---|---|---|
| max. speed | 100 U/min | 100 U/min | 100 U/min |
| max. pre-tensioning load | 15 t @ 340 bar | 30 t @ 330 bar | 45 t @ 340 bar |
| max. drive torque | 400 Nm | 800 Nm | 950 Nm |
| max. holding load | 15,5 t @ 350 bar | 32 t @ 350 bar | 46,5 t @ 350 bar |
| stroke | 300 mm | 400 mm | 500 mm |
| Q max | 20 l/min | 45 l/min | 45 l/min |
| P max | 200 bar | 150 bar | 180 bar |
| weight | 61 kg | 87 kg | 142 kg |
| D | 150 mm | 180 mm | 198 mm |
| d | 28 mm | 38 mm | 45 mm |
| G | 35 mm | 36 mm | 49,50 mm |
| H | 799 mm | 953 mm | 1100 mm |
| T | 25 mm | 35 mm | 50 mm |
| W | 30,50 mm | 38 mm | 45 mm |
In keeping with our staysail furling systems, we offer a range of swivels. In addition to offering various materials (titanium and aluminium) we also provide various connection options.
This deck connection is based on a spherical segment in a low-friction bearing seat. Owing to the type of construction used, this bearing is significantly smaller. However, the sphere only allows for a maximum deflection angle of +/-10° in all directions. This means that the furling system has to be installed in an inclined deck structure.
The integrated check valve keeps the hose depressurised, even with attached stay loads, therefore preventing damage caused by a burst hydraulic hose. The adjustable pressure relief valve, which is also integrated, loosens the stay adjuster in the event of an overload and thus prevents the furling system from being damaged. An optional pressure sensor allows for real-time monitoring of the internal cylinder pressure and therefore the attached stay load.