[HIA.II – Tensioning rams with integrated pump unit]

Manual backstay adjuster

Since January 2019, Reckmann supplies the improved HIA.II integral adjuster.

The tension of the backstay has a significant impact on your yacht’s sailing performance. By using the Reckmann integral adjusters, you can influence these sizes in a quick, powerful and targeted manner. 

Your benefits at a glance: 

[Product variants]

  HIA.II-10 HIA.II-12 HIA.II-17 HIA.II-22
product art. no., black 59377 56189 57770 56261
product art. no., silver 63166 63167 63171 63172
max. working pressure 350 bar 440 bar 350 bar 440 bar
max. pulling force 2,70 t 3,40 t 4,80 t 6 t
stroke 325 mm 325 mm 365 mm 365 mm
pin ∅ d 0,5 inch 0,63 inch 0,63 inch 0,75 inch
cylinder outside ∅ D 49,50 mm 49,50 mm 60 mm 60 mm
pin center length (extended) A 1125 mm 1125 mm 1221 mm 1221 mm
pin center length (retracted) A 800 mm 800 mm 856 mm 856 mm
clevis width W1 16,50 mm 16,50 mm 19,50 mm 19,50 mm
clevis width W2 16,50 mm 20,50 mm 28 mm 28 mm
clevis depth G1 51 mm 51 mm 63 mm 63 mm
clevis depth G2 48 mm 48 mm 63 mm 63 mm
max. width B1 44,50 mm 44,50 mm 54,50 mm 54,50 mm
max. width B2 49,50 mm 49,50 mm 59,80 mm 59,80 mm
weight 4,60 kg 4,60 kg 6,40 kg 6,40 kg
service set art. no. 63273 63273 63275 63275
max. handle angle E 69 ° 69 ° 63 ° 63 °
handle length L 488 mm 488 mm 488 mm 488 mm
max. handle heigth H1 556,80 mm 556,80 mm 520 mm 520 mm
min. handle heigth H2 80 mm 80 mm 88 mm 88 mm