| article number | 70118 |
| power supply | hydraulic |
| attachment of the sail | without profile |
| type of installation | below Deck |
| max. speed | 67 U/min |
| max. pre-tensioning load | 30 t @ 330 bar |
| max. drive torque | 679 Nm |
| max. holding load | 32 t @ 350 bar |
| stroke | 400 mm |
| Q max | 60 l/min |
| P max | 140 bar |
| weight | 87 kg |
| D | 180 mm |
| d | 38 mm |
| G | 36 mm |
| H | 778 mm |
| T | 35 mm |
| W | 38 mm |
Hydraulic staysail furling system with worm gear for below-deck installation
The Reckmann SF staysail furler is a combination of a turning padeye and a hydraulic stay tensioner. It is designed for staysails that are hoisted on a halyard lock. The self-aligning deck flange reduces bending loads on the extended piston. The stay connector with a quick-release pin allows quick and easy sail attachment.
The SF-SW is hydraulically driven through a worm gear. This eliminates the need for an additional hydraulic brake and allows a reduced installation length below deck compared to the SF-S.
In keeping with our staysail furling systems, we offer a range of swivels. In addition to offering various materials (titanium and aluminium) we also provide various connection options.
This deck connection is based on a spherical segment in a low-friction bearing seat. Owing to the type of construction used, this bearing is significantly smaller. However, the sphere only allows for a maximum deflection angle of +/-10° in all directions. This means that the furling system has to be installed in an inclined deck structure.
The integrated check valve keeps the hose depressurised, even with attached stay loads, therefore preventing damage caused by a burst hydraulic hose. The adjustable pressure relief valve, which is also integrated, loosens the stay adjuster in the event of an overload and thus prevents the furling system from being damaged. An optional pressure sensor allows for real-time monitoring of the internal cylinder pressure and therefore the attached stay load.