| power supply | hydraulic |
| attachment of the sail | with profile |
Hydraulic below-deck furling system
Installation: in deck (structural)
Forestay adjuster: Real-Time adjuster
The Reckmann UD-SC is a deck-integrated hydraulic furling system. While the drive unit, gearing and mechanics are located completely below deck, the system does not use a chainplate connection. Instead, the furling unit is integrated into a reinforced deck structure and transfers all forestay and tack loads directly into it.
The UD-SC system is available in different variants and offers the following key features:
The UD-SCRT is equipped with a Real-Time Adjuster (RT) that allows the forestay tension to be actively changed while sailing. The system features an integrated hydraulic adjustment ram that takes the full forestay load and enables precise control of rig tension under changing conditions. A PO check valve isolates the hydraulic adjuster from the supply lines when not operated. This ensures a stiff load path and consistent rig behaviour.
An ultrasonic sensor can be integrated to provide real-time information about the position of the adjuster piston. This allows the crew to monitor the current adjustment state of the forestay precisely and reproducibly.
The UD-SCRT combines a clean, deck-integrated installation with fully under-deck mechanics and advanced real-time trimming capability – a high-performance solution for yachts with reinforced deck structures and demanding rig requirements.
| UD-2SCRT | UD-3SCRT | UD-4SCRT | UD-5SCRT | UD-5.5SCRT | UD-6.5SCRT | |
|---|---|---|---|---|---|---|
| max. headstay length | 23 m | 36 m | 42 m | 50 m | 58 m | 70 m |
| forestay (rod size) | -40 | -60 | -91 | -170 | -220 | -320 |
| ø forestay (wire) | 12 mm | 16 mm | 22 mm | 32 mm | ||
| aluminium profiles | R20, R30 | R40, R50, R5 | R5, R6 | R6, R7 | R7, R8 | |
| carbon profiles | S2, S2.5 | S3, S4, S4.5 | S5, S5.5 | S6, S6.5, S7 | S6.5, S7, S7.5, S8 | S7.5, S8, S8.5, S9 |
| stroke stay adjuster | 80 mm | 100 mm | 150 mm | 200 mm | 250 mm | 400 mm |
| mwl stay | 9 t | 13,50 t | 21 t | 39 t | 50 t | 73 t |
| mwl tack ring | 1,50 t | 2 t | 3 t | 5 t | 6 t | 8 t |
| mwl tack ring HL (opt.) | 7,80 t | 12 t | 18 t | 33 t | 43 t | 58 t |
| pulling force RT-adjuster | 7 t @ 350 bar | 12 t @ 250 bar | 18 t @ 275 bar | 33 t @ 255 bar | 43 t @ 315 bar | 58 t @ 320 bar |
| max. oil flow motor | 10 l/min | 17 l/min | 35 l/min | 50 l/min | 60 l/min | 65 l/min |
| max. pressure motor | 70 bar | 100 bar | 140 bar | 140 bar | 150 bar | 175 bar |
| place of installation | in-deck (structural) | in-deck (structural) | in-deck (structural) | in-deck (structural) | in-deck (structural) | in-deck (structural) |
| weight | 15,70 kg | 30,70 kg | 60,80 kg | 121 kg | 145 kg | 312 kg |
| B | 150 mm | 196 mm | 244 mm | 310 mm | 318 mm | 428 mm |
| H | 291 mm | 388 mm | 471 mm | 610 mm | 711 mm | 975 mm |
| L | 197 mm | 230 mm | 278 mm | 348 mm | 348 mm | 406 mm |
| O | 174 mm | 252 mm | 340 mm | 420 mm | 398 mm | 568 mm |
| T | 15 mm | 30 mm | 40 mm | 40 mm | 45 mm | 50 mm |
The unique manual drive ensures the greatest possible level of security. By simply inserting a standard winch handle, the electric drive will disconnect and switch to manual operation. Due to this special gear mechanism that prevents sail forces from transferring to the winch handle, the reefing system can be safely and easily operated, even when in manual mode.
The Reckmann high-performance halyard swivels turn with extremely low amounts of friction, thereby guaranteeing a secure operation without twisting the halyard. The compact design and size graduation ensure a low weight aloft.
The tack slider or floating tack swivel allows the sail luff to be tensioned independently of the stay. This is a necessary addition, specifically with sails that have a halyard lock.
Our carbon profiles offer high resistance and low weight at the same time. A weight reduction of 50-60 % in comparison with conventional aluminium profiles means that there is a significant improvement in performance.