| product art. no., black | 59404 |
| product art. no., silver | 63153 |
| max. working pressure | 350 bar |
| max. pulling force without gas compression | 4,80 t |
| max. pushing force with gas compression | 559 kg |
| type of hub | with standard stroke |
| stroke | 375 mm |
| pin center length (extended) A | 1061 mm |
| pin center length (retracted) A | 686 mm |
| weight | 4 kg |
| piston rod thread | 3/4 Zoll - 16 UNF |
| hydraulic port male | 7/16 Zoll JIC |
| service set art. no. | 63268 |
| d | 0,63 inch |
| D | 60 mm |
| W | 19,50 mm |
| G | 61 mm |
| B | 54,50 mm |
Hydraulic tensioning rams for a wide range of applications.
Reckmann HCL.II cylinders are primarily designed as backstay tensioners, while offering the flexibility for various additional rigging applications such as
The cylinders are designed as single-acting units and are equipped with a gas pre-charge on the opposite side. This ensures extension even when no external pulling force is applied.
They feature a standard black or silver anodised finish and are supplied with clevis fittings. Other colours and fittings are available. Double-acting versions are available on request, for example for applications such as hatch or door actuation.
Reckmann HCL.II cylinders enable fast and precise rigging adjustments, especially in backstay applications, and can be operated in combination with Reckmann pump panels or hydraulic units.