| article number | 61641 |
| power supply | electric |
| attachment of the sail | with profile |
| max. headstay length | 23 m |
| forestay (rod size) | -40 |
| ø forestay (wire) | 12 mm |
| aluminium profiles | R20, R30 |
| carbon profiles | S2, S2.5 |
| stroke stay adjuster | 80 mm |
| mwl tack ring | 1,50 t |
| mwl tack ring HL (opt.) | 7,80 t |
| pulling force RT-adjuster | 7t @ 350 bar |
| max. speed | 27 U/min |
| max. drive torque | 82 Nm |
| voltage | 24 V |
| place of installation | in-deck (structural) |
| weight | 15,70 kg |
| B | 150 mm |
| H | 290 mm |
| L | 363 mm |
| O | 280 mm |
| T | 15 mm |
Electric hydraulic below-deck furling system
Installation: In-deck (structural)
Forestay adjuster: Real-Time adjuster
The Reckmann UD-SCE is a deck-integrated hydraulic furling system. While the drive unit, gearing and mechanics are located completely below deck, the system does not use a chainplate connection. Instead, the furling unit is integrated into a reinforced deck structure and transfers all forestay and tack loads directly into it.
The UD-SCE system is available in different variants and offers the following key features:
The UD-SCERT is equipped with a Real-Time Adjuster (RT) that allows the forestay tension to be actively changed while sailing. The system features an integrated hydraulic adjustment ram that takes the full forestay load and enables precise control of rig tension under changing conditions. A PO check valve isolates the hydraulic adjuster from the supply lines when not operated. This ensures a stiff load path and consistent rig behaviour.
An ultrasonic sensor can be integrated to provide real-time information about the position of the adjuster piston. This allows the crew to monitor the current adjustment state of the forestay precisely and reproducibly.
The UD-SCERT combines a clean, deck-integrated installation with fully under-deck mechanics and advanced real-time trimming capability – a high-performance solution for yachts with reinforced deck structures and demanding rig requirements.
The Reckmann high-performance halyard swivels turn with extremely low amounts of friction, thereby guaranteeing a secure operation without twisting the halyard. The compact design and size graduation ensure a low weight aloft.
The tack slider or floating tack swivel allows the sail luff to be tensioned independently of the stay. This is a necessary addition, specifically with sails that have a halyard lock.
Our carbon profiles offer high resistance and low weight at the same time. A weight reduction of 50-60 % in comparison with conventional aluminium profiles means that there is a significant improvement in performance.