[HCL.II – Tensioning rams]

Hydraulic tensioning rams for a wide range of applications.

Reckmann HCL.II cylinders are primarily designed as backstay tensioners, while offering the flexibility for various additional rigging applications such as

The cylinders are designed as single-acting units and are equipped with a gas pre-charge on the opposite side. This ensures extension even when no external pulling force is applied.
They feature a standard black or silver anodised finish and are supplied with clevis fittings. Other colours and fittings are available. Double-acting versions are available on request, for example for applications such as hatch or door actuation.

Reckmann HCL.II cylinders enable fast and precise rigging adjustments, especially in backstay applications, and can be operated in combination with Reckmann pump panels or hydraulic units.

[type of hub: with standard stroke]

  HCL.II-10 HCL.II-12 HCL.II-17 HCL.II-22 HCL-30 HCL-40
product art. no., black 59405 59406 59404 56165 25921 25927
product art. no., silver 63139 63142 63153 63156 25917 25923
Position Indication art. no., black on request on request
Position Indication art. no., silver on request on request
max. working pressure 350 bar 440 bar 350 bar 440 bar 440 bar 440 bar
max. pulling force without gas compression 2,70 t 3,40 t 4,80 t 6 t 10,50 t 14,50 t
max. pushing force with gas compression 333 kg 333 kg 559 kg 559 kg 1107 kg 1575 kg
stroke 350 mm 350 mm 375 mm 375 mm 430 mm 500 mm
pin center length (extended) A 982 mm 982 mm 1061 mm 1061 mm 1233 mm 1375 mm
pin center length (retracted) A 632 mm 632 mm 686 mm 686 mm 803 mm 875 mm
weight 2,60 kg 2,60 kg 4 kg 4 kg 8,30 kg 12 kg
piston rod thread 5/8 Zoll - 18 UNF 5/8 Zoll - 18 UNF 3/4 Zoll - 16 UNF 3/4 Zoll - 16 UNF 7/8” - 14 UNF 1” - 12 UNF
hydraulic port male 7/16 Zoll JIC 7/16 Zoll JIC 7/16 Zoll JIC 7/16 Zoll JIC 7/16” JIC 7/16” JIC
service set art. no. 63266 63266 63268 63268 37948 37953
d 0,5 inch 0,63 inch 0,63 inch 0,75 inch 0,87 inch 1 inch
D 49,50 mm 49,50 mm 60 mm 60 mm 84 mm 98 mm
W 16,50 mm 16,50 mm 19,50 mm 19,50 mm 22,50 mm 25,50 mm
G 50 mm 50 mm 61 mm 61 mm 66 mm 72,80 mm
B 44,50 mm 44,50 mm 54,50 mm 54,50 mm 59 mm 72,20 mm

[type of hub: with long stroke]

  HCL.II-10/LS HCL.II-12/LS HCL.II-17/LS HCL.II-22/LS HCL-30/LS HCL-40/LS
product art. no., black 62571 62576 62592 62591 26010 26012
product art. no., silver 63140 63144 63155 63157 26007 26011
max. working pressure 350 bar 440 bar 350 bar 440 bar 440 bar 440 bar
max. pulling force without gas compression 2,70 t 3,40 t 4,80 t 6 t 10,50 t 14,50 t
max. pushing force with gas compression 333 kg 333 kg 559 kg 559 kg 1107 kg 1575 kg
stroke 700 mm 700 mm 700 mm 700 mm 700 mm 700 mm
pin center length (extended) A 1717 mm 1717 mm 1756 mm 1756 mm 1803 mm 1806 mm
pin center length (retracted) A 1017 mm 1017 mm 1056 mm 1056 mm 1103 mm 1106 mm
weight 4,30 kg 4,30 kg 6,20 kg 6,20 kg 11,60 kg 15,50 kg
piston rod thread 5/8 Zoll - 18 UNF 5/8 Zoll - 18 UNF 3/4 Zoll - 16 UNF 3/4 Zoll - 16 UNF 7/8” - 14 UNF 1” - 12 UNF
hydraulic port male 7/16 Zoll JIC 7/16 Zoll JIC 7/16 Zoll JIC 7/16 Zoll JIC 7/16” JIC 7/16” JIC
service set art. no. 63266 63266 63268 63268 37948 37953
d 0,5 inch 0,63 inch 0,63 inch 0,75 inch 0,87 inch 1 inch
D 49,50 mm 49,50 mm 60 mm 60 mm 84 mm 98 mm
W 16,50 mm 16,50 mm 19,50 mm 19,50 mm 22,50 mm 25,50 mm
G 50 mm 50 mm 61 mm 61 mm 66 mm 72,80 mm
B 44,50 mm 44,50 mm 54,50 mm 54,50 mm 59 mm 72,20 mm

Downloads

HCL.II-10 measurement sheet / technical drawing

Download: 98-02-02-901.-HCL.II-10B.PDF